Blockchain Size Bitcoin.com Charts

Bitcoin Fullnode Install Guide for Dummies ;-)

Bitcoin Fullnode Install Guide for Dummies ;-)
Feel free to stop at Level 0 or Level 1, which is fine. More advanced configs are offered to those with more tech savvy. This guide, obviously assumes a Windows 10 install, but other OSes work fine, just find a different guide. BTW, the "For Dummies" is a callback to a set of "tech" books in the 90's intended to be as easy as possible. It is in jest and not intended to insult the reader. Finally, if you dislike the formatting, a well formatted copy can be found here
There is a fairly small subset of Bitcoin users that run a full node. I think the idea of running a full node has gotten a bad rap over the years since there is so much talk about running on a Raspberry Pi, or getting zippy SSDs. Although all of this can be fun, it is often not really required at all. Here are some ways to run a full node starting with the very simple. I'll get into more complex configs, but these are all optional.

Tech Skill Level: 0 (the basics)

  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
In many cases, thats it. If your running a new machine with a fairly good internet connection, 8 or 9 hours will be enough to complete the "Initial Block Download" (IBD). This may fill up your drive a bit, but again, on most new machines, 300 GB of space isn't that hard to come by.

Tech Skill Level: 1 (encrypted wallet)

One thing we left out in the level-0 exercise is encrypting your wallet. It's easy enough to do well, but a bit more difficult to do right. The main challenge is that humans generate really poor passwords. If you want a good password, the best way is to use something called "diceware". Basically, you just grab 4 or 5 dice and each throw of the dice represents a certain word on a special list. The throw {1,4,5,3,1} for example would be the word camping on the EFF-diceware-wordlist. So you repeat this a few times until you have a list of 8 or so words which becomes the passphrase you use to encrypt your wallet. Write it down, it is always hard to remember at first. So at level-1 your list becomes:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Choose Encrypt Wallet from the Settings menu
  5. Enter your 8 word (or so) passphrase generated using the Diceware method

Wallet Encryption Dialog

Tech Skill Level: 2 (enable pruning if needed)

Though I said "300 GB of space isn't hard to come by", some times it actually is. If space is an issue, a simple way to fix it is to tell bitcoin to simple take less space. This is called "pruning" and can take that number from 300 GB down to below 5 GB. If you can't find 5 GB, then you'll have to read ahead to level-4 to add USB storage. But the good news is, enabling pruning is pretty easy, we just add another step to our working list:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Choose Options from the Settings menu
  6. Choose Prune block storage to: and select the max size for the blocks to use
  7. Exit and restart the bitcoin application for the changes to take effect

Pruning Dialog
Note, even setting this to 1 GB will still leave you with about a 4.5 GB install. The blocks take up a lot of space, but the chainstate and other folders eat up at least 3.5 GB and they can't be pruned. Also, be aware, to disable pruning requires you to perform the entire IBD again. While pruned some other functions my be disabled as well, so just know that pruning does limit some functionality.

Tech Skill Level: 3 (verify the installer)

Although this is arguably something that should be done at level-0, some find the intricacies of comparing hash (thumbprint) values to be tedious and beyond the scope of a beginner. You will find these types of hash compares suggested quite often as a way to prevent running tainted programs. Programs are often tainted by bad disk or network performance, but most often, taint is malicious code inserted by viruses or malware. This is a way to guard yourself against those types of attacks.
What I cover here is a very basic comparison on the certificate, but a more thorough verification advised by mosts uses a program called Gpg4Win, and is beyond the scope of this beginners guide. But regardless, most users should strive to do this minimum level of validation.
  1. Download Bitcoin Core
  2. Launch the downloaded installer
  3. When prompted "Do you want to allow..." click Show more details
  4. In the details section select Show information about the publisher's certificate
  5. In the certificate window select the Details tab
  6. In the Details tab Subject should start with "CN = Bitcoin Core Code Signing Association"
  7. Ensure Thumbprint in Details reads ea27d3cefb3eb715ed214176a5d027e01ba1ee86
  8. If the checks pass, click OK to exit the certificate window and Yes to allow the installer to run.
  9. Launch the installed "Bitcoin Core" app and let it run overnight
  10. Do the wallet encryption steps here if you wish
  11. Do the optional pruning steps here if you wish

Certification Validation Windows
Note: The certificate used to sign the current Bitcoin installer is only valid from March 2020 to March 2021. After that point the thumbprint on the certificate will change. This is by design and intentional. If your reading this post after March 2021, then it is understood that the thumbprint has changed.

Tech Skill Level: 4 (use secondary storage)

We glossed over the "new machine with fairly good internet" part. Truth be known many people do not have fairly new machines, and find the IBD to take longer than the "over night" best wishes. For most people the slowdown is the disk access when calculating what is called chainstate. This requires fast random reads and writes to the disk. If you have an SSD disk, this will be no problem, but if you have a non-SSD "spinning" disk, random writes are always slow. Though an SSD will speed things up, they are pricey, so a nice middle ground may be a simple high-end USB key drive. You can get some with 10 to 15 MB/s random writes for $20 on Amazon. This is usually a order of magnitude faster than a "spinning" disk. And with pruning (see level-2), a small USB drive should be fine.
Once you decide on a drive, the tricky part will be to enable external storage. It requires editing a configuration file and adding a line. First, we want to create a directory on the key drive. You will need to determine the drive letter of your USB key drive. For the sake of this example, we will assume it is D:, but you must determine this yourself and correct the example. Once you know the drive letter, create a blank folder on the drive called Bitcoin. So for this example, creating Bitcoin on drive D: will create the path D:\Bitcoin. Once done, assuming that D: is your drive, here are the new steps including the edit of the configuration file:
  1. Download Bitcoin Core
  2. Launch the installer, verify it, then run it
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Do the optional pruning steps here if you wish
  6. Launch "Notepad" by typing "Notepad.exe" in the windows search bar then click Open
  7. Type the line datadir=D:\Bitcoin (depending on your drive letter) in the blank file
  8. Choose Save from the File menu in notepad
  9. Type %APPDATA%\Bitcoin\bitcoin.conf (note the percent signs) in the File name box
  10. Select All Files from the Save as type dropdown
  11. Click the Save button and overwrite the file if prompted
  12. Exit and restart the bitcoin application for the changes to take effect

Save As Dialog
Now that you've reached this level of technical expertise, there are many new configuration options that you can begin to modify if you wish. Most configuration data is contained in the bitcoin.conf file and learning how to maintain it is a key step for a node operator.

Tech Skill Level: 5 (all other customizations)

Here's a short list of various things you can ADD to your bitcoin.conf file. You generally just add a new line for each configuration settings.
  • addresstype=bech32
  • changetype=bech32
The addresstype / changetype allows your wallet to use the native-segwit (bech32) format. This is the most efficient and inexpensive way to spend bitcoin, and is a recommended configuration. The default uses something called p2sh-segwit which is more compatible with older wallets, but more expensive to spend.
  • minrelaytxfee=0.00000011
Changing the minrelaytxfee setting allows you to help propagate lower fee transactions. It will require more memory but TXN memory is capped at 300 MB by default anyways, so if you have enough memory, it is a good setting to choose.
  • dbcache=2048
The dbcache setting controls how many MB of memory the program will use for the chainstate database. Since this is a key bottleneck in the IBD, setting this value high (2048 MB) will greatly speed up the IBD, assuming you have the memory to spare
  • blocksdir=C:\Bitcoin
  • datadir=D:\Bitcoin
In level-4 we discussed moving the datadir to a fast external storage, but the majority of the space used for bitcoin is the blocks directory (blocksdir). Although you should always use for fastest storage for datadir, you are free to use slow storage for blocksdir. So if you only want to consume a small amount of your SSD (assumed D:) then you can keep your blocks on your slow "spinning" drive.
  • upnp=1
One of the harder challenges you may face running a node, is to get incoming connections. If you are lucky, you may find that your firewall and network HW support the uPnP protocol. If they do, this setting will allow bitcoin to configure uPnP to allow incoming connections to your node. Other methods exist to make your node reachable, but they are well beyond the scope of this guide.
submitted by brianddk to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Symbol Platform by NEM - Tokenomics

First of all, remember that, you can get 1 XYM for 1 NEM you have.
Tokenomics
The Symbol public chain is a self-sustaining economic ecosystem involving node operators, harvesters, investors, users, and the XYM token. In this way, it’s similar to many decentralized blockchains, but there are important differences that make it easier for anyone to earn rewards. Here are the basics of the system.
XYM Supply and Inflation
XYM has a fixed maximum supply of approximately 9 billion tokens. At public chain release, the supply will consist of about 7.3 billion XYM, allocated to users based on their holdings of XEM on the NEM blockchain. Another 1.7 billion XYM will be created as inflationary rewards over time. The inflation rate is closely mapped to that of bitcoin, extending out over the next 100 years. Similar to mining rewards, Symbol’s rewards will be released to each block creator, but based on a POS+ (Proof of Stake+) system.
Proof of Stake
POS+ lets nodes create blocks based on their XYM stakes, which are holdings. Symbol uses the term harvesting instead of mining. The more tokens held by a node operator, the higher the chances of creating the next block and earning harvesting rewards. POS is a well-known system in the blockchain industry, but Symbol adds some improvements. POS+ calculates a score for each node operator based on the size of their stake AND other factors, such as recent network activity and the stakes that other users may delegate to them (see Delegated Harvesting below.) In this way, POS+ attempts to incentivize usage, competition for low fees, and other desirable behavior. You can read details on how POS+ is calculated in the Symbol whitepaper.
Nodes
Node operators all over the world keep the Symbol protocol robust and decentralized. For keeping the system running, node owners earn rewards from four sources.
Node operators can set up their nodes locally or on cloud services. For details on how to set up a node, refer to the developer documentation.
Block Rewards
Since Symbol’s blocks are confirmed several times per minute, rewards are frequent. Block rewards consist of inflation rewards and transaction fees. The chances of earning a block reward are based mainly on the operator’s XYM stake, as well as other factors like network activity. Both node operators and anyone else with a XYM wallet can earn block rewards.
The higher an account’s XYM balance, the higher the chance of it earning a block reward. Even those who don’t run a node can earn block rewards by delegating their stake to a node.
Delegated Harvesting
XYM owners who don’t operate nodes can also earn block rewards by delegating their stake to a node. Holders who delegate their stake retain full ownership of their coins and never expose their private keys. No funds have ever been lost from delegated harvesting. When delegated harvesters earn a block reward, the node operator who processed it earns 25% and the delegated harvester earns 75%. In this way, a node operator can greatly increase their earned rewards, and all holders can participate in rewards whether or not they run a node.
Transaction Fees
Node operators can set their own minimum fees for which they wish to process transactions. The lower the fees accepted, the more transactions they will be able to process. Generous node operators may even choose to process transactions for free if they wish. This creates competition among node operators.
Node Bonus Program
In order to incentivize stability in the number of nodes and circulating supply after launch, bonus rewards will be paid to node operators who maintain nodes with minimum balances of 1 million, 2 million, or 3 million XYM, with higher bonus rates for each tier. These rewards will draw from a fixed pool of reserves and gradually ramp down over six years.
Total Node Income
To summarize, node operators will earn income from block rewards (inflation + transaction fees) based on their own stakes and a 25% share of delegated stake block rewards. Estimates place these combined node rewards at approximately 5% or 6% for the first year, though this is not guaranteed. Operators can also earn bonuses for maintaining minimum stakes of over 1 million XYM.
Inflation Rate
Symbol’s inflation is mapped to bitcoin’s inflation with one difference. Bitcoin halves its rewards every four years. Symbol also drops its reward rate by half every four years, but instead of a single big drop, these reductions are spaced out to occur every quarter. This gives the same overall inflation as bitcoin, but with a more gradual decline.
Team Reserves
The Symbol Core Team will hold approximately 22% of XYM supply for funding future development, marketing, and partner projects. Historically, Core Team funds have not been used for harvesting and there are no plans to begin, meaning more block rewards available for other harvesters.
https://symbolplatform.com/
submitted by waterbottles4 to nem [link] [comments]

Symbol Platform by NEM - Tokenomics

First of all, remember that, you can get 1 XYM for 1 NEM you have.
Tokenomics
The Symbol public chain is a self-sustaining economic ecosystem involving node operators, harvesters, investors, users, and the XYM token. In this way, it’s similar to many decentralized blockchains, but there are important differences that make it easier for anyone to earn rewards. Here are the basics of the system.
XYM Supply and Inflation
XYM has a fixed maximum supply of approximately 9 billion tokens. At public chain release, the supply will consist of about 7.3 billion XYM, allocated to users based on their holdings of XEM on the NEM blockchain. Another 1.7 billion XYM will be created as inflationary rewards over time. The inflation rate is closely mapped to that of bitcoin, extending out over the next 100 years. Similar to mining rewards, Symbol’s rewards will be released to each block creator, but based on a POS+ (Proof of Stake+) system.
Proof of Stake
POS+ lets nodes create blocks based on their XYM stakes, which are holdings. Symbol uses the term harvesting instead of mining. The more tokens held by a node operator, the higher the chances of creating the next block and earning harvesting rewards. POS is a well-known system in the blockchain industry, but Symbol adds some improvements. POS+ calculates a score for each node operator based on the size of their stake AND other factors, such as recent network activity and the stakes that other users may delegate to them (see Delegated Harvesting below.) In this way, POS+ attempts to incentivize usage, competition for low fees, and other desirable behavior. You can read details on how POS+ is calculated in the Symbol whitepaper.
Nodes
Node operators all over the world keep the Symbol protocol robust and decentralized. For keeping the system running, node owners earn rewards from four sources.
Node operators can set up their nodes locally or on cloud services. For details on how to set up a node, refer to the developer documentation.
Block Rewards
Since Symbol’s blocks are confirmed several times per minute, rewards are frequent. Block rewards consist of inflation rewards and transaction fees. The chances of earning a block reward are based mainly on the operator’s XYM stake, as well as other factors like network activity. Both node operators and anyone else with a XYM wallet can earn block rewards.
The higher an account’s XYM balance, the higher the chance of it earning a block reward. Even those who don’t run a node can earn block rewards by delegating their stake to a node.
Delegated Harvesting
XYM owners who don’t operate nodes can also earn block rewards by delegating their stake to a node. Holders who delegate their stake retain full ownership of their coins and never expose their private keys. No funds have ever been lost from delegated harvesting. When delegated harvesters earn a block reward, the node operator who processed it earns 25% and the delegated harvester earns 75%. In this way, a node operator can greatly increase their earned rewards, and all holders can participate in rewards whether or not they run a node.
Transaction Fees
Node operators can set their own minimum fees for which they wish to process transactions. The lower the fees accepted, the more transactions they will be able to process. Generous node operators may even choose to process transactions for free if they wish. This creates competition among node operators.
Node Bonus Program
In order to incentivize stability in the number of nodes and circulating supply after launch, bonus rewards will be paid to node operators who maintain nodes with minimum balances of 1 million, 2 million, or 3 million XYM, with higher bonus rates for each tier. These rewards will draw from a fixed pool of reserves and gradually ramp down over six years.
Total Node Income
To summarize, node operators will earn income from block rewards (inflation + transaction fees) based on their own stakes and a 25% share of delegated stake block rewards. Estimates place these combined node rewards at approximately 5% or 6% for the first year, though this is not guaranteed. Operators can also earn bonuses for maintaining minimum stakes of over 1 million XYM.
Inflation Rate
Symbol’s inflation is mapped to bitcoin’s inflation with one difference. Bitcoin halves its rewards every four years. Symbol also drops its reward rate by half every four years, but instead of a single big drop, these reductions are spaced out to occur every quarter. This gives the same overall inflation as bitcoin, but with a more gradual decline.
Team Reserves
The Symbol Core Team will hold approximately 22% of XYM supply for funding future development, marketing, and partner projects. Historically, Core Team funds have not been used for harvesting and there are no plans to begin, meaning more block rewards available for other harvesters.
https://symbolplatform.com/
submitted by waterbottles4 to ico [link] [comments]

Symbol Platform by NEM - Tokenomics

First of all, remember that, you can get 1 XYM for 1 NEM you have.
Tokenomics
The Symbol public chain is a self-sustaining economic ecosystem involving node operators, harvesters, investors, users, and the XYM token. In this way, it’s similar to many decentralized blockchains, but there are important differences that make it easier for anyone to earn rewards. Here are the basics of the system.
XYM Supply and Inflation
XYM has a fixed maximum supply of approximately 9 billion tokens. At public chain release, the supply will consist of about 7.3 billion XYM, allocated to users based on their holdings of XEM on the NEM blockchain. Another 1.7 billion XYM will be created as inflationary rewards over time. The inflation rate is closely mapped to that of bitcoin, extending out over the next 100 years. Similar to mining rewards, Symbol’s rewards will be released to each block creator, but based on a POS+ (Proof of Stake+) system.
Proof of Stake
POS+ lets nodes create blocks based on their XYM stakes, which are holdings. Symbol uses the term harvesting instead of mining. The more tokens held by a node operator, the higher the chances of creating the next block and earning harvesting rewards. POS is a well-known system in the blockchain industry, but Symbol adds some improvements. POS+ calculates a score for each node operator based on the size of their stake AND other factors, such as recent network activity and the stakes that other users may delegate to them (see Delegated Harvesting below.) In this way, POS+ attempts to incentivize usage, competition for low fees, and other desirable behavior. You can read details on how POS+ is calculated in the Symbol whitepaper.
Nodes
Node operators all over the world keep the Symbol protocol robust and decentralized. For keeping the system running, node owners earn rewards from four sources.
Node operators can set up their nodes locally or on cloud services. For details on how to set up a node, refer to the developer documentation.
Block Rewards
Since Symbol’s blocks are confirmed several times per minute, rewards are frequent. Block rewards consist of inflation rewards and transaction fees. The chances of earning a block reward are based mainly on the operator’s XYM stake, as well as other factors like network activity. Both node operators and anyone else with a XYM wallet can earn block rewards.
The higher an account’s XYM balance, the higher the chance of it earning a block reward. Even those who don’t run a node can earn block rewards by delegating their stake to a node.
Delegated Harvesting
XYM owners who don’t operate nodes can also earn block rewards by delegating their stake to a node. Holders who delegate their stake retain full ownership of their coins and never expose their private keys. No funds have ever been lost from delegated harvesting. When delegated harvesters earn a block reward, the node operator who processed it earns 25% and the delegated harvester earns 75%. In this way, a node operator can greatly increase their earned rewards, and all holders can participate in rewards whether or not they run a node.
Transaction Fees
Node operators can set their own minimum fees for which they wish to process transactions. The lower the fees accepted, the more transactions they will be able to process. Generous node operators may even choose to process transactions for free if they wish. This creates competition among node operators.
Node Bonus Program
In order to incentivize stability in the number of nodes and circulating supply after launch, bonus rewards will be paid to node operators who maintain nodes with minimum balances of 1 million, 2 million, or 3 million XYM, with higher bonus rates for each tier. These rewards will draw from a fixed pool of reserves and gradually ramp down over six years.
Total Node Income
To summarize, node operators will earn income from block rewards (inflation + transaction fees) based on their own stakes and a 25% share of delegated stake block rewards. Estimates place these combined node rewards at approximately 5% or 6% for the first year, though this is not guaranteed. Operators can also earn bonuses for maintaining minimum stakes of over 1 million XYM.
Inflation Rate
Symbol’s inflation is mapped to bitcoin’s inflation with one difference. Bitcoin halves its rewards every four years. Symbol also drops its reward rate by half every four years, but instead of a single big drop, these reductions are spaced out to occur every quarter. This gives the same overall inflation as bitcoin, but with a more gradual decline.
Team Reserves
The Symbol Core Team will hold approximately 22% of XYM supply for funding future development, marketing, and partner projects. Historically, Core Team funds have not been used for harvesting and there are no plans to begin, meaning more block rewards available for other harvesters.
https://symbolplatform.com/
submitted by waterbottles4 to CryptoICO [link] [comments]

Symbol Platform by NEM - Tokenomics

First of all, remember that, you can get 1 XYM for 1 NEM you have.
Tokenomics
The Symbol public chain is a self-sustaining economic ecosystem involving node operators, harvesters, investors, users, and the XYM token. In this way, it’s similar to many decentralized blockchains, but there are important differences that make it easier for anyone to earn rewards. Here are the basics of the system.
XYM Supply and Inflation
XYM has a fixed maximum supply of approximately 9 billion tokens. At public chain release, the supply will consist of about 7.3 billion XYM, allocated to users based on their holdings of XEM on the NEM blockchain. Another 1.7 billion XYM will be created as inflationary rewards over time. The inflation rate is closely mapped to that of bitcoin, extending out over the next 100 years. Similar to mining rewards, Symbol’s rewards will be released to each block creator, but based on a POS+ (Proof of Stake+) system.
Proof of Stake
POS+ lets nodes create blocks based on their XYM stakes, which are holdings. Symbol uses the term harvesting instead of mining. The more tokens held by a node operator, the higher the chances of creating the next block and earning harvesting rewards. POS is a well-known system in the blockchain industry, but Symbol adds some improvements. POS+ calculates a score for each node operator based on the size of their stake AND other factors, such as recent network activity and the stakes that other users may delegate to them (see Delegated Harvesting below.) In this way, POS+ attempts to incentivize usage, competition for low fees, and other desirable behavior. You can read details on how POS+ is calculated in the Symbol whitepaper.
Nodes
Node operators all over the world keep the Symbol protocol robust and decentralized. For keeping the system running, node owners earn rewards from four sources.
Node operators can set up their nodes locally or on cloud services. For details on how to set up a node, refer to the developer documentation.
Block Rewards
Since Symbol’s blocks are confirmed several times per minute, rewards are frequent. Block rewards consist of inflation rewards and transaction fees. The chances of earning a block reward are based mainly on the operator’s XYM stake, as well as other factors like network activity. Both node operators and anyone else with a XYM wallet can earn block rewards.
The higher an account’s XYM balance, the higher the chance of it earning a block reward. Even those who don’t run a node can earn block rewards by delegating their stake to a node.
Delegated Harvesting
XYM owners who don’t operate nodes can also earn block rewards by delegating their stake to a node. Holders who delegate their stake retain full ownership of their coins and never expose their private keys. No funds have ever been lost from delegated harvesting. When delegated harvesters earn a block reward, the node operator who processed it earns 25% and the delegated harvester earns 75%. In this way, a node operator can greatly increase their earned rewards, and all holders can participate in rewards whether or not they run a node.
Transaction Fees
Node operators can set their own minimum fees for which they wish to process transactions. The lower the fees accepted, the more transactions they will be able to process. Generous node operators may even choose to process transactions for free if they wish. This creates competition among node operators.
Node Bonus Program
In order to incentivize stability in the number of nodes and circulating supply after launch, bonus rewards will be paid to node operators who maintain nodes with minimum balances of 1 million, 2 million, or 3 million XYM, with higher bonus rates for each tier. These rewards will draw from a fixed pool of reserves and gradually ramp down over six years.
Total Node Income
To summarize, node operators will earn income from block rewards (inflation + transaction fees) based on their own stakes and a 25% share of delegated stake block rewards. Estimates place these combined node rewards at approximately 5% or 6% for the first year, though this is not guaranteed. Operators can also earn bonuses for maintaining minimum stakes of over 1 million XYM.
Inflation Rate
Symbol’s inflation is mapped to bitcoin’s inflation with one difference. Bitcoin halves its rewards every four years. Symbol also drops its reward rate by half every four years, but instead of a single big drop, these reductions are spaced out to occur every quarter. This gives the same overall inflation as bitcoin, but with a more gradual decline.
Team Reserves
The Symbol Core Team will hold approximately 22% of XYM supply for funding future development, marketing, and partner projects. Historically, Core Team funds have not been used for harvesting and there are no plans to begin, meaning more block rewards available for other harvesters.
https://symbolplatform.com/
submitted by waterbottles4 to CryptoICONews [link] [comments]

Symbol Platform by NEM - Tokenomics

First of all, remember that, you can get 1 XYM for 1 NEM you have.
Tokenomics
The Symbol public chain is a self-sustaining economic ecosystem involving node operators, harvesters, investors, users, and the XYM token. In this way, it’s similar to many decentralized blockchains, but there are important differences that make it easier for anyone to earn rewards. Here are the basics of the system.
XYM Supply and Inflation
XYM has a fixed maximum supply of approximately 9 billion tokens. At public chain release, the supply will consist of about 7.3 billion XYM, allocated to users based on their holdings of XEM on the NEM blockchain. Another 1.7 billion XYM will be created as inflationary rewards over time. The inflation rate is closely mapped to that of bitcoin, extending out over the next 100 years. Similar to mining rewards, Symbol’s rewards will be released to each block creator, but based on a POS+ (Proof of Stake+) system.
Proof of Stake
POS+ lets nodes create blocks based on their XYM stakes, which are holdings. Symbol uses the term harvesting instead of mining. The more tokens held by a node operator, the higher the chances of creating the next block and earning harvesting rewards. POS is a well-known system in the blockchain industry, but Symbol adds some improvements. POS+ calculates a score for each node operator based on the size of their stake AND other factors, such as recent network activity and the stakes that other users may delegate to them (see Delegated Harvesting below.) In this way, POS+ attempts to incentivize usage, competition for low fees, and other desirable behavior. You can read details on how POS+ is calculated in the Symbol whitepaper.
Nodes
Node operators all over the world keep the Symbol protocol robust and decentralized. For keeping the system running, node owners earn rewards from four sources.
Node operators can set up their nodes locally or on cloud services. For details on how to set up a node, refer to the developer documentation.
Block Rewards
Since Symbol’s blocks are confirmed several times per minute, rewards are frequent. Block rewards consist of inflation rewards and transaction fees. The chances of earning a block reward are based mainly on the operator’s XYM stake, as well as other factors like network activity. Both node operators and anyone else with a XYM wallet can earn block rewards.
The higher an account’s XYM balance, the higher the chance of it earning a block reward. Even those who don’t run a node can earn block rewards by delegating their stake to a node.
Delegated Harvesting
XYM owners who don’t operate nodes can also earn block rewards by delegating their stake to a node. Holders who delegate their stake retain full ownership of their coins and never expose their private keys. No funds have ever been lost from delegated harvesting. When delegated harvesters earn a block reward, the node operator who processed it earns 25% and the delegated harvester earns 75%. In this way, a node operator can greatly increase their earned rewards, and all holders can participate in rewards whether or not they run a node.
Transaction Fees
Node operators can set their own minimum fees for which they wish to process transactions. The lower the fees accepted, the more transactions they will be able to process. Generous node operators may even choose to process transactions for free if they wish. This creates competition among node operators.
Node Bonus Program
In order to incentivize stability in the number of nodes and circulating supply after launch, bonus rewards will be paid to node operators who maintain nodes with minimum balances of 1 million, 2 million, or 3 million XYM, with higher bonus rates for each tier. These rewards will draw from a fixed pool of reserves and gradually ramp down over six years.
Total Node Income
To summarize, node operators will earn income from block rewards (inflation + transaction fees) based on their own stakes and a 25% share of delegated stake block rewards. Estimates place these combined node rewards at approximately 5% or 6% for the first year, though this is not guaranteed. Operators can also earn bonuses for maintaining minimum stakes of over 1 million XYM.
Inflation Rate
Symbol’s inflation is mapped to bitcoin’s inflation with one difference. Bitcoin halves its rewards every four years. Symbol also drops its reward rate by half every four years, but instead of a single big drop, these reductions are spaced out to occur every quarter. This gives the same overall inflation as bitcoin, but with a more gradual decline.
Team Reserves
The Symbol Core Team will hold approximately 22% of XYM supply for funding future development, marketing, and partner projects. Historically, Core Team funds have not been used for harvesting and there are no plans to begin, meaning more block rewards available for other harvesters.
https://symbolplatform.com/
submitted by waterbottles4 to ICOAnalysis [link] [comments]

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake

Scaling Reddit Community Points with Arbitrum Rollup: a piece of cake
https://preview.redd.it/b80c05tnb9e51.jpg?width=2550&format=pjpg&auto=webp&s=850282c1a3962466ed44f73886dae1c8872d0f31
Submitted for consideration to The Great Reddit Scaling Bake-Off
Baked by the pastry chefs at Offchain Labs
Please send questions or comments to [[email protected] ](mailto:[email protected])
1. Overview
We're excited to submit Arbitrum Rollup for consideration to The Great Reddit Scaling Bake-Off. Arbitrum Rollup is the only Ethereum scaling solution that supports arbitrary smart contracts without compromising on Ethereum's security or adding points of centralization. For Reddit, this means that Arbitrum can not only scale the minting and transfer of Community Points, but it can foster a creative ecosystem built around Reddit Community Points enabling points to be used in a wide variety of third party applications. That's right -- you can have your cake and eat it too!
Arbitrum Rollup isn't just Ethereum-style. Its Layer 2 transactions are byte-for-byte identical to Ethereum, which means Ethereum users can continue to use their existing addresses and wallets, and Ethereum developers can continue to use their favorite toolchains and development environments out-of-the-box with Arbitrum. Coupling Arbitrum’s tooling-compatibility with its trustless asset interoperability, Reddit not only can scale but can onboard the entire Ethereum community at no cost by giving them the same experience they already know and love (well, certainly know).
To benchmark how Arbitrum can scale Reddit Community Points, we launched the Reddit contracts on an Arbitrum Rollup chain. Since Arbitrum provides full Solidity support, we didn't have to rewrite the Reddit contracts or try to mimic their functionality using an unfamiliar paradigm. Nope, none of that. We launched the Reddit contracts unmodified on Arbitrum Rollup complete with support for minting and distributing points. Like every Arbitrum Rollup chain, the chain included a bridge interface in which users can transfer Community Points or any other asset between the L1 and L2 chains. Arbitrum Rollup chains also support dynamic contract loading, which would allow third-party developers to launch custom ecosystem apps that integrate with Community Points on the very same chain that runs the Reddit contracts.
1.1 Why Ethereum
Perhaps the most exciting benefit of distributing Community Points using a blockchain is the ability to seamlessly port points to other applications and use them in a wide variety of contexts. Applications may include simple transfers such as a restaurant that allows Redditors to spend points on drinks. Or it may include complex smart contracts -- such as placing Community Points as a wager for a multiparty game or as collateral in a financial contract.
The common denominator between all of the fun uses of Reddit points is that it needs a thriving ecosystem of both users and developers, and the Ethereum blockchain is perhaps the only smart contract platform with significant adoption today. While many Layer 1 blockchains boast lower cost or higher throughput than the Ethereum blockchain, more often than not, these attributes mask the reality of little usage, weaker security, or both.
Perhaps another platform with significant usage will rise in the future. But today, Ethereum captures the mindshare of the blockchain community, and for Community Points to provide the most utility, the Ethereum blockchain is the natural choice.
1.2 Why Arbitrum
While Ethereum's ecosystem is unmatched, the reality is that fees are high and capacity is too low to support the scale of Reddit Community Points. Enter Arbitrum. Arbitrum Rollup provides all of the ecosystem benefits of Ethereum, but with orders of magnitude more capacity and at a fraction of the cost of native Ethereum smart contracts. And most of all, we don't change the experience from users. They continue to use the same wallets, addresses, languages, and tools.
Arbitrum Rollup is not the only solution that can scale payments, but it is the only developed solution that can scale both payments and arbitrary smart contracts trustlessly, which means that third party users can build highly scalable add-on apps that can be used without withdrawing money from the Rollup chain. If you believe that Reddit users will want to use their Community Points in smart contracts--and we believe they will--then it makes the most sense to choose a single scaling solution that can support the entire ecosystem, eliminating friction for users.
We view being able to run smart contracts in the same scaling solution as fundamentally critical since if there's significant demand in running smart contracts from Reddit's ecosystem, this would be a load on Ethereum and would itself require a scaling solution. Moreover, having different scaling solutions for the minting/distribution/spending of points and for third party apps would be burdensome for users as they'd have to constantly shuffle their Points back and forth.
2. Arbitrum at a glance
Arbitrum Rollup has a unique value proposition as it offers a combination of features that no other scaling solution achieves. Here we highlight its core attributes.
Decentralized. Arbitrum Rollup is as decentralized as Ethereum. Unlike some other Layer 2 scaling projects, Arbitrum Rollup doesn't have any centralized components or centralized operators who can censor users or delay transactions. Even in non-custodial systems, centralized components provide a risk as the operators are generally incentivized to increase their profit by extracting rent from users often in ways that severely degrade user experience. Even if centralized operators are altruistic, centralized components are subject to hacking, coercion, and potential liability.
Massive Scaling. Arbitrum achieves order of magnitude scaling over Ethereum's L1 smart contracts. Our software currently supports 453 transactions-per-second for basic transactions (at 1616 Ethereum gas per tx). We have a lot of room left to optimize (e.g. aggregating signatures), and over the next several months capacity will increase significantly. As described in detail below, Arbitrum can easily support and surpass Reddit's anticipated initial load, and its capacity will continue to improve as Reddit's capacity needs grow.
Low cost. The cost of running Arbitrum Rollup is quite low compared to L1 Ethereum and other scaling solutions such as those based on zero-knowledge proofs. Layer 2 fees are low, fixed, and predictable and should not be overly burdensome for Reddit to cover. Nobody needs to use special equipment or high-end machines. Arbitrum requires validators, which is a permissionless role that can be run on any reasonable on-line machine. Although anybody can act as a validator, in order to protect against a “tragedy of the commons” and make sure reputable validators are participating, we support a notion of “invited validators” that are compensated for their costs. In general, users pay (low) fees to cover the invited validators’ costs, but we imagine that Reddit may cover this cost for its users. See more on the costs and validator options below.
Ethereum Developer Experience. Not only does Arbitrum support EVM smart contracts, but the developer experience is identical to that of L1 Ethereum contracts and fully compatible with Ethereum tooling. Developers can port existing Solidity apps or write new ones using their favorite and familiar toolchains (e.g. Truffle, Buidler). There are no new languages or coding paradigms to learn.
Ethereum wallet compatibility. Just as in Ethereum, Arbitrum users need only hold keys, but do not have to store any coin history or additional data to protect or access their funds. Since Arbitrum transactions are semantically identical to Ethereum L1 transactions, existing Ethereum users can use their existing Ethereum keys with their existing wallet software such as Metamask.
Token interoperability. Users can easily transfer their ETH, ERC-20 and ERC-721 tokens between Ethereum and the Arbitrum Rollup chain. As we explain in detail below, it is possible to mint tokens in L2 that can subsequently be withdrawn and recognized by the L1 token contract.
Fast finality. Transactions complete with the same finality time as Ethereum L1 (and it's possible to get faster finality guarantees by trading away trust assumptions; see the Arbitrum Rollup whitepaper for details).
Non-custodial. Arbitrum Rollup is a non-custodial scaling solution, so users control their funds/points and neither Reddit nor anyone else can ever access or revoke points held by users.
Censorship Resistant. Since it's completely decentralized, and the Arbitrum protocol guarantees progress trustlessly, Arbitrum Rollup is just as censorship-proof as Ethereum.
Block explorer. The Arbitrum Rollup block explorer allows users to view and analyze transactions on the Rollup chain.
Limitations
Although this is a bake-off, we're not going to sugar coat anything. Arbitrum Rollup, like any Optimistic Rollup protocol, does have one limitation, and that's the delay on withdrawals.
As for the concrete length of the delay, we've done a good deal of internal modeling and have blogged about this as well. Our current modeling suggests a 3-hour delay is sufficient (but as discussed in the linked post there is a tradeoff space between the length of the challenge period and the size of the validators’ deposit).
Note that this doesn't mean that the chain is delayed for three hours. Arbitrum Rollup supports pipelining of execution, which means that validators can keep building new states even while previous ones are “in the pipeline” for confirmation. As the challenge delays expire for each update, a new state will be confirmed (read more about this here).
So activity and progress on the chain are not delayed by the challenge period. The only thing that's delayed is the consummation of withdrawals. Recall though that any single honest validator knows immediately (at the speed of L1 finality) which state updates are correct and can guarantee that they will eventually be confirmed, so once a valid withdrawal has been requested on-chain, every honest party knows that the withdrawal will definitely happen. There's a natural place here for a liquidity market in which a validator (or someone who trusts a validator) can provide withdrawal loans for a small interest fee. This is a no-risk business for them as they know which withdrawals will be confirmed (and can force their confirmation trustlessly no matter what anyone else does) but are just waiting for on-chain finality.
3. The recipe: How Arbitrum Rollup works
For a description of the technical components of Arbitrum Rollup and how they interact to create a highly scalable protocol with a developer experience that is identical to Ethereum, please refer to the following documents:
Arbitrum Rollup Whitepaper
Arbitrum academic paper (describes a previous version of Arbitrum)
4. Developer docs and APIs
For full details about how to set up and interact with an Arbitrum Rollup chain or validator, please refer to our developer docs, which can be found at https://developer.offchainlabs.com/.
Note that the Arbitrum version described on that site is older and will soon be replaced by the version we are entering in Reddit Bake-Off, which is still undergoing internal testing before public release.
5. Who are the validators?
As with any Layer 2 protocol, advancing the protocol correctly requires at least one validator (sometimes called block producers) that is honest and available. A natural question is: who are the validators?
Recall that the validator set for an Arbitrum chain is open and permissionless; anyone can start or stop validating at will. (A useful analogy is to full nodes on an L1 chain.) But we understand that even though anyone can participate, Reddit may want to guarantee that highly reputable nodes are validating their chain. Reddit may choose to validate the chain themselves and/or hire third-party validators.To this end, we have begun building a marketplace for validator-for-hire services so that dapp developers can outsource validation services to reputable nodes with high up-time. We've announced a partnership in which Chainlink nodes will provide Arbitrum validation services, and we expect to announce more partnerships shortly with other blockchain infrastructure providers.
Although there is no requirement that validators are paid, Arbitrum’s economic model tracks validators’ costs (e.g. amount of computation and storage) and can charge small fees on user transactions, using a gas-type system, to cover those costs. Alternatively, a single party such as Reddit can agree to cover the costs of invited validators.
6. Reddit Contract Support
Since Arbitrum contracts and transactions are byte-for-byte compatible with Ethereum, supporting the Reddit contracts is as simple as launching them on an Arbitrum chain.
Minting. Arbitrum Rollup supports hybrid L1/L2 tokens which can be minted in L2 and then withdrawn onto the L1. An L1 contract at address A can make a special call to the EthBridge which deploys a "buddy contract" to the same address A on an Arbitrum chain. Since it's deployed at the same address, users can know that the L2 contract is the authorized "buddy" of the L1 contract on the Arbitrum chain.
For minting, the L1 contract is a standard ERC-20 contract which mints and burns tokens when requested by the L2 contract. It is paired with an ERC-20 contract in L2 which mints tokens based on whatever programmer provided minting facility is desired and burns tokens when they are withdrawn from the rollup chain. Given this base infrastructure, Arbitrum can support any smart contract based method for minting tokens in L2, and indeed we directly support Reddit's signature/claim based minting in L2.
Batch minting. What's better than a mint cookie? A whole batch! In addition to supporting Reddit’s current minting/claiming scheme, we built a second minting design, which we believe outperforms the signature/claim system in many scenarios.
In the current system, Reddit periodically issues signed statements to users, who then take those statements to the blockchain to claim their tokens. An alternative approach would have Reddit directly submit the list of users/amounts to the blockchain and distribute the tokens to the users without the signature/claim process.
To optimize the cost efficiency of this approach, we designed an application-specific compression scheme to minimize the size of the batch distribution list. We analyzed the data from Reddit's previous distributions and found that the data is highly compressible since token amounts are small and repeated, and addresses appear multiple times. Our function groups transactions by size, and replaces previously-seen addresses with a shorter index value. We wrote client code to compress the data, wrote a Solidity decompressing function, and integrated that function into Reddit’s contract running on Arbitrum.
When we ran the compression function on the previous Reddit distribution data, we found that we could compress batched minting data down to to 11.8 bytes per minting event (averaged over a 6-month trace of Reddit’s historical token grants)compared with roughly 174 bytes of on-chain data needed for the signature claim approach to minting (roughly 43 for an RLP-encoded null transaction + 65 for Reddit's signature + 65 for the user's signature + roughly 8 for the number of Points) .
The relative benefit of the two approaches with respect to on-chain call data cost depends on the percentage of users that will actually claim their tokens on chain. With the above figures, batch minting will be cheaper if roughly 5% of users redeem their claims. We stress that our compression scheme is not Arbitrum-specific and would be beneficial in any general-purpose smart contract platform.
8. Benchmarks and costs
In this section, we give the full costs of operating the Reddit contracts on an Arbitrum Rollup chain including the L1 gas costs for the Rollup chain, the costs of computation and storage for the L2 validators as well as the capital lockup requirements for staking.
Arbitrum Rollup is still on testnet, so we did not run mainnet benchmarks. Instead, we measured the L1 gas cost and L2 workload for Reddit operations on Arbitrum and calculated the total cost assuming current Ethereum gas prices. As noted below in detail, our measurements do not assume that Arbitrum is consuming the entire capacity of Ethereum. We will present the details of our model now, but for full transparency you can also play around with it yourself and adjust the parameters, by copying the spreadsheet found here.
Our cost model is based on measurements of Reddit’s contracts, running unmodified (except for the addition of a batch minting function) on Arbitrum Rollup on top of Ethereum.
On the distribution of transactions and frequency of assertions. Reddit's instructions specify the following minimum parameters that submissions should support:
Over a 5 day period, your scaling PoC should be able to handle:
  • 100,000 point claims (minting & distributing points)
  • 25,000 subscriptions
  • 75,000 one-off points burning
  • 100,000 transfers
We provide the full costs of operating an Arbitrum Rollup chain with this usage under the assumption that tokens are minted or granted to users in batches, but other transactions are uniformly distributed over the 5 day period. Unlike some other submissions, we do not make unrealistic assumptions that all operations can be submitted in enormous batches. We assume that batch minting is done in batches that use only a few percent on an L1 block’s gas, and that other operations come in evenly over time and are submitted in batches, with one batch every five minutes to keep latency reasonable. (Users are probably already waiting for L1 finality, which takes at least that long to achieve.)
We note that assuming that there are only 300,000 transactions that arrive uniformly over the 5 day period will make our benchmark numbers lower, but we believe that this will reflect the true cost of running the system. To see why, say that batches are submitted every five minutes (20 L1 blocks) and there's a fixed overhead of c bytes of calldata per batch, the cost of which will get amortized over all transactions executed in that batch. Assume that each individual transaction adds a marginal cost of t. Lastly assume the capacity of the scaling system is high enough that it can support all of Reddit's 300,000 transactions within a single 20-block batch (i.e. that there is more than c + 300,000*t byes of calldata available in 20 blocks).
Consider what happens if c, the per-batch overhead, is large (which it is in some systems, but not in Arbitrum). In the scenario that transactions actually arrive at the system's capacity and each batch is full, then c gets amortized over 300,000 transactions. But if we assume that the system is not running at capacity--and only receives 300,000 transactions arriving uniformly over 5 days-- then each 20-block assertion will contain about 200 transactions, and thus each transaction will pay a nontrivial cost due to c.
We are aware that other proposals presented scaling numbers assuming that 300,000 transactions arrived at maximum capacity and was executed in a single mega-transaction, but according to our estimates, for at least one such report, this led to a reported gas price that was 2-3 orders of magnitude lower than it would have been assuming uniform arrival. We make more realistic batching assumptions, and we believe Arbitrum compares well when batch sizes are realistic.
Our model. Our cost model includes several sources of cost:
  • L1 gas costs: This is the cost of posting transactions as calldata on the L1 chain, as well as the overhead associated with each batch of transactions, and the L1 cost of settling transactions in the Arbitrum protocol.
  • Validator’s staking costs: In normal operation, one validator will need to be staked. The stake is assumed to be 0.2% of the total value of the chain (which is assumed to be $1 per user who is eligible to claim points). The cost of staking is the interest that could be earned on the money if it were not staked.
  • Validator computation and storage: Every validator must do computation to track the chain’s processing of transactions, and must maintain storage to keep track of the contracts’ EVM storage. The cost of computation and storage are estimated based on measurements, with the dollar cost of resources based on Amazon Web Services pricing.
It’s clear from our modeling that the predominant cost is for L1 calldata. This will probably be true for any plausible rollup-based system.
Our model also shows that Arbitrum can scale to workloads much larger than Reddit’s nominal workload, without exhausting L1 or L2 resources. The scaling bottleneck will ultimately be calldata on the L1 chain. We believe that cost could be reduced substantially if necessary by clever encoding of data. (In our design any compression / decompression of L2 transaction calldata would be done by client software and L2 programs, never by an L1 contract.)
9. Status of Arbitrum Rollup
Arbitrum Rollup is live on Ethereum testnet. All of the code written to date including everything included in the Reddit demo is open source and permissively licensed under the Apache V2 license. The first testnet version of Arbitrum Rollup was released on testnet in February. Our current internal version, which we used to benchmark the Reddit contracts, will be released soon and will be a major upgrade.
Both the Arbitrum design as well as the implementation are heavily audited by independent third parties. The Arbitrum academic paper was published at USENIX Security, a top-tier peer-reviewed academic venue. For the Arbitrum software, we have engaged Trail of Bits for a security audit, which is currently ongoing, and we are committed to have a clean report before launching on Ethereum mainnet.
10. Reddit Universe Arbitrum Rollup Chain
The benchmarks described in this document were all measured using the latest internal build of our software. When we release the new software upgrade publicly we will launch a Reddit Universe Arbitrum Rollup chain as a public demo, which will contain the Reddit contracts as well as a Uniswap instance and a Connext Hub, demonstrating how Community Points can be integrated into third party apps. We will also allow members of the public to dynamically launch ecosystem contracts. We at Offchain Labs will cover the validating costs for the Reddit Universe public demo.
If the folks at Reddit would like to evaluate our software prior to our public demo, please email us at [email protected] and we'd be more than happy to provide early access.
11. Even more scaling: Arbitrum Sidechains
Rollups are an excellent approach to scaling, and we are excited about Arbitrum Rollup which far surpasses Reddit's scaling needs. But looking forward to Reddit's eventual goal of supporting hundreds of millions of users, there will likely come a time when Reddit needs more scaling than any Rollup protocol can provide.
While Rollups greatly reduce costs, they don't break the linear barrier. That is, all transactions have an on-chain footprint (because all calldata must be posted on-chain), albeit a far smaller one than on native Ethereum, and the L1 limitations end up being the bottleneck for capacity and cost. Since Ethereum has limited capacity, this linear use of on-chain resources means that costs will eventually increase superlinearly with traffic.
The good news is that we at Offchain Labs have a solution in our roadmap that can satisfy this extreme-scaling setting as well: Arbitrum AnyTrust Sidechains. Arbitrum Sidechains are similar to Arbitrum Rollup, but deviate in that they name a permissioned set of validators. When a chain’s validators agree off-chain, they can greatly reduce the on-chain footprint of the protocol and require almost no data to be put on-chain. When validators can't reach unanimous agreement off-chain, the protocol reverts to Arbitrum Rollup. Technically, Arbitrum Sidechains can be viewed as a hybrid between state channels and Rollup, switching back and forth as necessary, and combining the performance and cost that state channels can achieve in the optimistic case, with the robustness of Rollup in other cases. The core technical challenge is how to switch seamlessly between modes and how to guarantee that security is maintained throughout.
Arbitrum Sidechains break through this linear barrier, while still maintaining a high level of security and decentralization. Arbitrum Sidechains provide the AnyTrust guarantee, which says that as long as any one validator is honest and available (even if you don't know which one will be), the L2 chain is guaranteed to execute correctly according to its code and guaranteed to make progress. Unlike in a state channel, offchain progress does not require unanimous consent, and liveness is preserved as long as there is a single honest validator.
Note that the trust model for Arbitrum Sidechains is much stronger than for typical BFT-style chains which introduce a consensus "voting" protocols among a small permissioned group of validators. BFT-based protocols require a supermajority (more than 2/3) of validators to agree. In Arbitrum Sidechains, by contrast, all you need is a single honest validator to achieve guaranteed correctness and progress. Notice that in Arbitrum adding validators strictly increases security since the AnyTrust guarantee provides correctness as long as any one validator is honest and available. By contrast, in BFT-style protocols, adding nodes can be dangerous as a coalition of dishonest nodes can break the protocol.
Like Arbitrum Rollup, the developer and user experiences for Arbitrum Sidechains will be identical to that of Ethereum. Reddit would be able to choose a large and diverse set of validators, and all that they would need to guarantee to break through the scaling barrier is that a single one of them will remain honest.
We hope to have Arbitrum Sidechains in production in early 2021, and thus when Reddit reaches the scale that surpasses the capacity of Rollups, Arbitrum Sidechains will be waiting and ready to help.
While the idea to switch between channels and Rollup to get the best of both worlds is conceptually simple, getting the details right and making sure that the switch does not introduce any attack vectors is highly non-trivial and has been the subject of years of our research (indeed, we were working on this design for years before the term Rollup was even coined).
12. How Arbitrum compares
We include a comparison to several other categories as well as specific projects when appropriate. and explain why we believe that Arbitrum is best suited for Reddit's purposes. We focus our attention on other Ethereum projects.
Payment only Rollups. Compared to Arbitrum Rollup, ZK-Rollups and other Rollups that only support token transfers have several disadvantages:
  • As outlined throughout the proposal, we believe that the entire draw of Ethereum is in its rich smart contracts support which is simply not achievable with today's zero-knowledge proof technology. Indeed, scaling with a ZK-Rollup will add friction to the deployment of smart contracts that interact with Community Points as users will have to withdraw their coins from the ZK-Rollup and transfer them to a smart contract system (like Arbitrum). The community will be best served if Reddit builds on a platform that has built-in, frictionless smart-contract support.
  • All other Rollup protocols of which we are aware employ a centralized operator. While it's true that users retain custody of their coins, the centralized operator can often profit from censoring, reordering, or delaying transactions. A common misconception is that since they're non-custodial protocols, a centralized sequencer does not pose a risk but this is incorrect as the sequencer can wreak havoc or shake down users for side payments without directly stealing funds.
  • Sidechain type protocols can eliminate some of these issues, but they are not trustless. Instead, they require trust in some quorum of a committee, often requiring two-third of the committee to be honest, compared to rollup protocols like Arbitrum that require only a single honest party. In addition, not all sidechain type protocols have committees that are diverse, or even non-centralized, in practice.
  • Plasma-style protocols have a centralized operator and do not support general smart contracts.
13. Concluding Remarks
While it's ultimately up to the judges’ palate, we believe that Arbitrum Rollup is the bakeoff choice that Reddit kneads. We far surpass Reddit's specified workload requirement at present, have much room to optimize Arbitrum Rollup in the near term, and have a clear path to get Reddit to hundreds of millions of users. Furthermore, we are the only project that gives developers and users the identical interface as the Ethereum blockchain and is fully interoperable and tooling-compatible, and we do this all without any new trust assumptions or centralized components.
But no matter how the cookie crumbles, we're glad to have participated in this bake-off and we thank you for your consideration.
About Offchain Labs
Offchain Labs, Inc. is a venture-funded New York company that spun out of Princeton University research, and is building the Arbitrum platform to usher in the next generation of scalable, interoperable, and compatible smart contracts. Offchain Labs is backed by Pantera Capital, Compound VC, Coinbase Ventures, and others.
Leadership Team
Ed Felten
Ed Felten is Co-founder and Chief Scientist at Offchain Labs. He is on leave from Princeton University, where he is the Robert E. Kahn Professor of Computer Science and Public Affairs. From 2015 to 2017 he served at the White House as Deputy United States Chief Technology Officer and senior advisor to the President. He is an ACM Fellow and member of the National Academy of Engineering. Outside of work, he is an avid runner, cook, and L.A. Dodgers fan.
Steven Goldfeder
Steven Goldfeder is Co-founder and Chief Executive Officer at Offchain Labs. He holds a PhD from Princeton University, where he worked at the intersection of cryptography and cryptocurrencies including threshold cryptography, zero-knowledge proof systems, and post-quantum signatures. He is a co-author of Bitcoin and Cryptocurrency Technologies, the leading textbook on cryptocurrencies, and he has previously worked at Google and Microsoft Research, where he co-invented the Picnic signature algorithm. When not working, you can find Steven spending time with his family, taking a nature walk, or twisting balloons.
Harry Kalodner
Harry Kalodner is Co-founder and Chief Technology Officer at Offchain Labs where he leads the engineering team. Before the company he attended Princeton as a Ph.D candidate where his research explored economics, anonymity, and incentive compatibility of cryptocurrencies, and he also has worked at Apple. When not up at 3:00am writing code, Harry occasionally sleeps.
submitted by hkalodner to ethereum [link] [comments]

Welcome to the Official Energi Cryptocurrency Reddit!

Welcome to the Official Energi Cryptocurrency Reddit!

https://preview.redd.it/mymfi39kf2c51.png?width=200&format=png&auto=webp&s=71c90d32c9bf87dbd393e85bbeedb753e202a5b0
Below you will find a Table of Contents that will cover all the fundamentals of the cryptocurrency.

Table of Contents

  1. What is Energi?
  2. What are the Fundamentals of Energi?
    1. Scalability
    2. Funding
    3. Governance
    4. Inflation
    5. Distribution
    6. Decentralization
    7. Long Term Vision
  3. Coin Specs
  4. How to Get Started
    1. Official Energi Website
    2. Social Media
    3. Exchanges
    4. Energi Block Explorers
    5. Wallet Downloads
    6. Proof-of-Stake Setup Guides
    7. Masternode Setup Guide
  5. FAQ

1. What is Energi

Energi is a self-funding (no ICO and no premine) cryptocurrency that has a purpose to become the world’s leading cryptocurrency with the unification of Smart Contracts, Governance and Self-funding Treasury to ensure longevity and enable rapid growth. You can read more about why we decided to self-fund and chose not to conduct an ICO here.
Energi provides a small allocation to Proof-of-Stake (PoS) rewards, takes a bulk of the coin issuance and gives it to its treasury and active Masternodes. Energi also allocates 10% on-going reward to the leadership of the Energi Backbone, which is significantly less compared to today’s ICOs’ rewarding their founders between 20–50% of the tokens distributed. Another trait that sets Energi apart from ICOs is they give an on-going 10% allocation through each block reward, rather than rewarding the founders up-front.

2. What are the Fundamentals of Energi?

  • Scalability
1 minute block times and a 2 megabyte block size limit provide Energi with a vast transaction capacity for regular on-chain transactions. This allows for plenty of space on the blockchain for extremely fast transactions with very low fees.
Energi features a powerful on-chain scaling solution with a system of incentivized full nodes called Energi Masternodes. A Masternode is a full node backed by 1,000 NRG collateral that provides level 2 scalability to the Energi Cryptocurrency. 40% of the emissions of Energi is allocated to Masternodes, providing an extremely strong incentive to grow the number of full nodes and scalability of the network.

  • Funding
A key feature of Energi is its powerful treasury system. Energi makes up to 40% of the emissions available to the treasury, to be utilized in a manner that provides maximum benefit.
Treasury allocation is decentralized, allowing for submitted proposals from anyone, to be voted on by Masternodes and paid out from the emissions.
Energi has a 14 day treasury cycle, allowing quick payments for proposal authors and contributors, as well as strategic responsiveness to effective proposals. Energi is guided by the principle that every dollar spent from its funding model should yield more than one dollar of value in return. Thanks to a 14 day treasury cycle, the Energi team is able to measure results and respond quickly to changes in strategy.

  • Governance
The Energi Treasury is a decentralized governance model designed with Masternodes as caretakers, with voting rights on how to best utilize treasury funding.
This governance model reduces risk by allowing participation from everyone who holds 1,000 NRG as a Masternode. In this way, the Energi community can work together on how to best build the strategic direction of Energi.

  • Inflation
Energi Cryptocurrency has a simple rate of inflation at 1 million coins per month with no maximum cap. This ensures consistency in funding allocation, Masternode rewards, and PoS rewards, making the economics of the cryptocurrency more understandable for everyone who chooses to participate in Energi.
No coin supply limit ensures that Energi is prepared for the long term, avoiding “bubble” economics caused by dramatic early inflation that in most coins only serves to benefit founders ahead of increased adoption.

  • Distribution
Energi conducted a fair launch on April 14, 2018 with no ICO and no premine. Prior to launch, the Energi team gave a specific time and date for the launch of its main net, which its vibrant community eagerly awaited, so that mining could begin fairly, again avoiding centralization among the coin founders (It's important to note that Energi has transitioned from Proof-of-Work consensus to a Proof-of-Stake consensus).
Energi Masternode payments were designed to begin at block 216000, which occurred on September 18, 2018, almost 160 days after launch. This ensured time to list Energi on exchanges, and to grow the community, encouraging fair and equitable distribution before the extremely powerful Masternode rewards began. It is all too common for Masternode coins to feature a premine, which has the effect of centralizing distribution among the founders and early adopters.
From 2018 to 2020, Energi distributed nearly 4 million coins to users who contributed to spreading awareness of the project with social media activities about Energi, such as tweets, follows, and subscriptions on all major social media platforms.

  • Decentralization
Decentralized governance with Masternodes helps to ensure everyone is able to participate in Energi and help guide the project to achieve the best results. The change to the requirement to run a Masternode, from 10 000 NRG to 1 000 NRG, has allowed more people to be involved and boosted decentralization for the whole project.

  • Long Term Vision
All of the above features seamlessly work together in concert, to ensure that Energi is prepared for the long term. Rather than try to closely find a niche in the market, Energi is prepared to adapt and overcome all challenges for many years to come. Energi’s use case is that of a traditional cryptocurrency, such as Bitcoin. However, Energi’s strategy is to excel by avoiding the pitfalls of previous projects, while further utilizing and improving upon the most powerful ideas in the cryptocurrency space.

3. Coin Specs

Ticker: NRG
Block time: 1 minute.
Hashing Algorithm: Dagger-Hashimoto (similar to Ethereum).
Masternode requirements: 1,000 Energi.
Treasury cycle: Every 14 days.
Approximately 1 million Energi will be released per month. The allocations can be observed easily as “10/10/40/40.”
10% will go to the Energi Backbone.
10% to the PoS participants
40% to Masternodes.
40% to the Treasury.
Thus, for every block, allocations are: 2.28 Energi to the Backbone, 2.28 Energi to the PoS participants, 9.14 Energi to the Treasury, and 9.14 Energi to Masternodes.
Since Treasury allocations are paid in two-week cycles, they are made in lump sums of approximately 184,000 Energi every 14 days.
In order to allow for widespread distribution of Energi before Masternode payments began, Masternode rewards were delayed until day 150. This was to allow the airdrop campaign to be completed and ensure a large amount of NRG is spread out through the community. Until that point, Masternode rewards were redirected to the Treasury. Thus for the first 5 months, the Treasury gained approximately 368,000 Energi every two weeks (about 800k Energi per month). The airdrop campaign was designed to release ~4 million Energi to the community.

4. How to Get Started

  • Energi Official Website
https://www.energi.world/

  • Social Media
Bitcointalk: https://bitcointalk.org/index.php?topic=4912743
Discord: https://discordapp.com/invite/sCtgNC3
Facebook: https://www.facebook.com/energicrypto/
Github: https://github.com/energicryptocurrency
LinkedIn: https://www.linkedin.com/company/energi-core/
Medium: https://medium.com/energi
Publish 0x: https://www.publish0x.com/@energi
Reddit: https://www.reddit.com/energicryptocurrency/
Steemit: https://steemit.com/@energi
Telegram: https://t.me/energicrypto
Telegram Announcement: https://t.me/energiannouncements
Twitter: https://twitter.com/Energicrypto
YouTube: https://www.youtube.com/channel/UCCABQly0NNR2j_M_iDpy8mA/

  • Exchanges
DigiFinex: https://www.digifinex.com/trade/BTC/NRG
KuCoin - BTC: https://www.kucoin.com/trade/NRG-BTC
KuCoin - ETH: https://www.kucoin.com/trade/NRG-ETH
HitBTC - BTC: https://hitbtc.com/NRG-to-BTC
BitBNs - INR: https://bitbns.com/trade/#/nrg
Mercatox - BTC: https://mercatox.com/exchange/NRG/BTC
Mercatox - TUSD: https://mercatox.com/exchange/NRG/BTC
Bithumb - BTC: https://www.bithumb.pro/en-us/spot/trade?q=NRG-BTC
Bithumb - USDT: https://www.bithumb.pro/en-us/spot/trade?q=NRG-USDT
Citex - BTC: https://trade.citex.co.ktrade/NRG_BTC
Citex - USDT: https://trade.citex.co.ktrade/NRG_USDT
Beaxy - BTC: https://www.beaxy.com/trading-paiNRG-BTC
CoinAll - USDT: https://www.coinall.com/spot/full#product=nrg_usdt
WhiteBit - BTC: https://whitebit.com/trade/NRG_BTC
HitBTC - BTC: https://hitbtc.com/exchange/NRG-to-BTC

  • Energi Block Explorers
Gen 3 Explorer: https://explorer.energi.network/
Gen 3 Calculator: https://nexus.energi.network/reward-calculator
Gen 2 Explorer: https://explorer.gen2.energi.network/

  • Wallet Downloads
Gen 3 - MyEnergiWallet: https://docs.energi.software/en/downloads/myenergiwallet
Gen 3 - Core Node: https://docs.energi.software/en/downloads/core-node

  • Proof-of-Stake Setup Guides
https://docs.energi.software/en/staking-guide

  • Masternode Setup Guide
https://docs.energi.software/en/Masternode-guide

5. FAQs

Gen 3 Wiki: https://docs.energi.software/en/home
General: https://docs.energi.software/en/faq/general
Core Node Sync: https://docs.energi.software/en/core-node-troubleshoot
Keystore: https://docs.energi.software/en/faq/keystore
Masternode: https://docs.energi.software/en/faq/Masternode
Migration: https://docs.energi.software/en/faq/migration
Security: https://docs.energi.software/en/faq/security
Staking: https://docs.energi.software/en/faq/staking
submitted by energicrypto to energicryptocurrency [link] [comments]

pSilocy3Ibin's Myc Supplies Syringe and Print Giveaway! 🙂🍄 New Menu Items! KSSS, Redboy, GT, P.E. 6, JMF, B+ Now in Stock 🍁🛫 Free shipping on spore print only orders! Very affordable shipping options for all of N.A. 🌄📮 *We only ship to legal states*

**All spores are for microscopy purposes only. No shipping to Idaho, California, or Georgia or anywhere else that prohibits the import of spores. Please do not mention cultivation, or else you will be blocked.*\*
This giveaway is for an assortment of syringes with some prints to top them off!
First prize gets 7 partly filled assorted MS syringes (approx 42cc) (GT, Redboy, JMF, Cambodian, ???), 1 xl GT print (approx 4 times the size of a regular print) and 1 regular GT print !
Second place gets 3 full MS syringes (B+, P.E. 6, GT) and 1 regular GT print
Third to fifth place gets 1 GT print.
In order to enter into the giveaway please upvote, comment and follow. The deadline to enter is Sunday July 5th at 7:20. The winners will be announced 1-2 days after.
**If you live somewhere that has expensive shipping, you can still enter to win prints, or you can pay for upgraded shipping if you win the syringes**
Also, all orders that are placed before 2pm EST today (June 25th) will receive a free GT print with their order.
Current Available Prints (DENSE): $14 CAD or approx $10 USD
(Limited xl Golden Teacher Prints - $22 CAD or $16USD - 1 per customer)
Golden Teacher
P.E. 6
Current Available Multispore Syringes: $11 CAD or approx $8 USD
Golden Teacher
P.E.
Jedi Mind F***
Koh Samui Super Strain
Redboy
B+ (limited, 1 per customer)
Deals
Prints
Multispore Syringes
Bulk orders available upon request.
Message or chat me to order (try message if chat doesn't work)
Shipping is done with Canada Post, and is calculated depending on your location. Within Canada xpresspost (1-2 day shipping w/ tracking) is usually $10-18. For shipping to the United States regular parcel starts at around $6 USD, and a tracked parcel is generally around $11 USD. Shipping for orders that only include prints are free worldwide (we do not ship anywhere where the import of spores is prohibited). If you would like a shipping quote, please send me your postal or zip code.
Accepted payment methods: bitcoin, paypal, credit/debit card, interac etransfer
If you have any questions please feel free to contact me !
Cheers,
Sil 🌄🍄
submitted by psilocy3Ibin to sporetraders [link] [comments]

Test

Test
There is a fairly small subset of Bitcoin users that run a full node. I think the idea of running a full node has gotten a bad rap over the years since there is so much talk about running on a Raspberry Pi, or getting zippy SSDs. Although all of this can be fun, it is often not really required at all. Here are some ways to run a full node starting with the very simple. I'll get into more complex configs, but these are all optional.

Tech Skill Level: 0 (the basics)

  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
In many cases, thats it. If your running a new machine with a fairly good internet connection, 8 or 9 hours will be enough to complete the "Initial Block Download" (IBD). This may fill up your drive a bit, but again, on most new machines, 300 GB of space isn't that hard to come by.

Tech Skill Level: 1 (encrypted wallet)

One thing we left out in the level-0 exercise is encrypting your wallet. It's easy enough to do well, but a bit more difficult to do right. The main challenge is that humans generate really poor passwords. If you want a good password, the best way is to use something called "diceware". Basically, you just grab 4 or 5 dice and each throw of the dice represents a certain word on a special list. The throw {1,4,5,3,1} for example would be the word camping on the EFF-diceware-wordlist. So you repeat this a few times until you have a list of 8 or so words which becomes the passphrase you use to encrypt your wallet. Write it down, it is always hard to remember at first. So at level-1 your list becomes:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Choose Encrypt Wallet from the Settings Menu
  5. Enter your 8 word (or so) passphrase generated using the Diceware method

Wallet Encryption Dialog

Tech Skill Level: 2 (enable pruning if needed)

Though I said "300 GB of space isn't hard to come by", some times it actually is. If space is an issue, a simple way to fix it is to tell bitcoin to simple take less space. This is called "pruning" and can take that number from 300 GB down to below 5 GB. If you can't find 5 GB, then you'll have to read ahead to level-3 to add USB storage. But the good news is, enabling pruning is pretty easy, we just add another step to our working list:
  1. Download Bitcoin Core
  2. Launch the downloaded installer and install the app
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Choose Options from the Settings Menu
  6. Choose Prune block storage to: and select the max size for the blocks to use
  7. Exit and restart the bitcoin application for the changes to take effect

Pruning Dialog
Note, even setting this to 1 GB will still leave you with about a 4.5 GB install. The blocks take up a lot of space, but the chainstate and other folders eat up at least 3.5 GB and they can't be pruned. Also, be aware, to disable pruning requires you to perform the entire IBD again. While pruned some other functions my be disabled as well, so just know that pruning does limit some functionality.

Tech Skill Level: 3 (verify the installer)

Although this is arguably something that should be done at level-0, some find the intricacies of comparing hash (thumbprint) values to be tedious and beyond the scope of a beginner. You will find these types of hash compares suggested quite often as a way to prevent running tainted programs. Programs are often tainted by bad disk or network performance, but most often, taint is malicious code inserted by viruses or malware. This is a way to guard yourself against those types of attacks. What I cover here is a very basic comparison on the certificate, but a more thorough comparison advised by mosts uses a program called Gpg4Win, and is beyond the scope of this beginners guide. But regardless, most users should strive to do this minimum level of validation.
  1. Download Bitcoin Core
  2. Launch the downloaded installer
  3. When prompted "Do you want to allow..." click Show more details
  4. In the details section select Show information about the publisher's certificate
  5. In the certificate window select the Details tab
  6. In the Details tab Subject should start with "CN = Bitcoin Core Code Signing Association"
  7. Also ensure Thumbprint reads ea27d3cefb3eb715ed214176a5d027e01ba1ee86
  8. If the checks pass, click OK to exit the certificate window and Yes to allow the installer to run.
  9. Launch the installed "Bitcoin Core" app and let it run overnight
  10. Do the wallet encryption steps here if you wish
  11. Do the optional pruning steps here if you wish

Certification Validation Windows
Note: The certificate used to sign the current Bitcoin installer is only valid from March 2020 to March 2021. After that point the thumbprint on the certificate will change. This is by design and intentional. If your reading this post after March 2021, then it is understood that the thumbprint has changed.

Tech Skill Level: 4 (use secondary storage)

We glossed over the "new machine with fairly good internet" part. Truth me known many people do not have fairly new machines, and find the IBD to take longer than the "over night" best wishes. For most people the slowdown is the disk access when calculating what is called chainstate. This requires fast random reads and writes to the disk. If you have an SSD disk, this will be no problem, but if you have a non-SSD "spinning" disk, random writes are always slow. Though an SSD will speed things up, they are pricey, so a nice middle ground may be a simple high-end USB key drive. You can get some with 10 to 15 MB/s random writes which is usually a order of magnitude faster than a "spinning" disk. And with pruning (see level-2), a small USB drive should be fine.
Once you decide on a drive, the tricky part will be to enable external storage. It requires editing a configuration file and adding a few lines. The configuration file needs to be in both the default directory, and USB key drive, but before we do that, we want to create a directory on the key drive. You will need to determine the drive letter of your USB key drive. For the sake of this example, we will assume it is D:, but you must determine this yourself and correct the example. Once you know the drive letter, create a blank folder on the drive called Bitcoin. So for this example, creating Bitcoin on drive D: will create the path D:\Bitcoin. Once done, assuming that D: is your drive, here are the steps to edit the two configuration files:
  1. Download Bitcoin Core
  2. Launch the installer, verify it, then run it
  3. Launch the installed "Bitcoin Core" app and let it run overnight
  4. Do the wallet encryption steps here if you wish
  5. Do the optional pruning steps here if you wish
  6. Launch "Notepad" by typing "Notepad.exe" in the windows search bar then click Open
  7. Type the line datadir=D:\Bitcoin (depending on your drive letter) in the blank file
  8. Choose Save from the File menu in notepad
  9. Type %APPDATA%\Bitcoin\bitcoin.conf (note the percent signs) in the File name box
  10. Select All Files from the Save as type dropdown
  11. Click the Save button and overwrite the file if prompted
  12. Exit and restart the bitcoin application for the changes to take effect

Save As Dialog
Now that you've reached this level of technical expertise, there are many new configuration options that you can begin to modify if you wish. Most configuration data is contained in the bitcoin.conf file and learning how to maintain it is a key step for a node operator.

Tech Skill Level: 5 (all other customizations)

Here's a short list of various things you can ADD to your bitcoin.conf file. You generally just add a new line for each configuration settings.
  • addresstype=bech32
  • changetype=bech32
The addresstype / changetype allows your wallet to use the native-segwit (bech32) format. This is the most efficient and inexpensive way to spend bitcoin, and is a recommended configuration. The default uses something called p2sh-segwit which is more compatible with older wallets, but more expensive to spend.
  • minrelaytxfee=0.00000011
Changing the minrelaytxfee setting allows you to help propagate lower fee transactions. It will require more memory but TXN memory is capped at 300 MB by default anyways, so if you have enough memory, it is a good setting to choose.
  • dbcache=2048
The dbcache setting controls how many MB of memory the program will use for the chainstate database. Since this is a key bottleneck in the IBD, setting this value high (2048 MB) will greatly speed up the IBD, assuming you have the memory to spare
  • blocksdir=C:\Bitcoin
  • datadir=D:\Bitcoin
In level-4 we discussed moving the datadir to a fast external storage, but the majority of the space used for bitcoin is the blocks directory (blocksdir). Although you should always use for fastest storage for datadir, you are free to use slow storage for blocksdir. So if you only want to consume a small amount of your SSD (assumed D:) then you can keep your blocks on your slow "spinning" drive.
  • upnp=1
One of the harder challenges you may face running a node, is to get incoming connections. If you are lucky, you may find that your firewall and network HW support the uPnP protocol. If they do, this setting will allow bitcoin to configure uPnP to allow incoming connections to your node.
submitted by brianddk to brianddk [link] [comments]

pSilocy3Ibin's Myc Supplies Syringe and Print Giveaway! 🙂🍄 New Menu Items! KSSS, Redboy, GT, P.E. 6, JMF, B+ Now in Stock 🍁🛫 Free shipping on spore print only orders! Very affordable shipping options for all of N.A. and some parts of E.U. 🌄📮 *We only ship to legal states*

**All spores are for microscopy purposes only. No shipping to Idaho, California, or Georgia or anywhere else that prohibits the import of spores. Please do not mention cultivation, or else you will be blocked.*\*
This giveaway is for an assortment of syringes with some prints to top them off!
First prize gets 7 partly filled assorted MS syringes (approx 42cc) (GT, Redboy, JMF, Cambodian, ???), 1 xl GT print (approx 4 times the size of a regular print) and 1 regular GT print !
Second place gets 3 full MS syringes (B+, P.E. 6, GT) and 1 regular GT print
Third to fifth place gets 1 GT print.
In order to enter into the giveaway please upvote, comment and follow. The deadline to enter is Sunday July 5th at 7:20. The winners will be announced 1-2 days after.
**If you live somewhere that has expensive shipping, you can still enter to win prints, or you can pay for upgraded shipping if you win the syringes**
Also, all orders that are placed before 2pm EST today (June 25th) will receive a free GT print with their order.
Current Available Prints (DENSE): $14 CAD or approx $10 USD
(Limited xl Golden Teacher Prints - $22 CAD or $16USD - 1 per customer)
Golden Teacher
P.E. 6
Current Available Multispore Syringes: $11 CAD or approx $8 USD
Golden Teacher
P.E.
Jedi Mind F***
Koh Samui Super Strain
Redboy
B+ (limited, 1 per customer)
Deals
Prints
Multispore Syringes
Bulk/custom orders available upon request.
Message or chat me to order (try message if chat doesn't work)
Shipping is done with Canada Post, and is calculated depending on your location. Within Canada xpresspost (1-2 day shipping w/ tracking) is usually $10-18. For shipping to the United States regular parcel starts at around $6 USD, and a tracked parcel is generally around $11 USD. Shipping for orders that only include prints are free worldwide (we do not ship anywhere where the import of spores is prohibited). If you would like a shipping quote, please send me your postal or zip code.
Accepted payment methods: bitcoin, paypal, credit/debit card, interac etransfer
If you have any questions please feel free to contact me !
Cheers,
Sil 🌄🍄
submitted by psilocy3Ibin to MycoBazaar [link] [comments]

Much of the crypto currency ecosystem doesn’t realize what amazing strides Bitcoin Cash has made in the last two years.

A few examples are:
1. SLP Tokens.
2. On chain dividend payments to token holders.
3. Schnorr Signatures
4. 32MB maximum block size increase limit enabling ~200 tx per second
5. Second most used crypto currency in the world for payments.
6. The crypto currency with the most physically accepting merchants in the world.
7. One of the most active developer and social communities.
8. Amazing new Opcodes like OP_CheckDataSig
9. On chain privacy tools that can provide privacy on par with Monero.
10. Listed on nearly every exchange around the world with many using it as a base pair.

What other developments are you excited about that we should help get the word out about?
submitted by MemoryDealers to btc [link] [comments]

Some informative responses from Colin and Andy from the just-concluded Nano AMA at the Atomic Wallet Telegram group

The AMA ran today from 13:00 - 14:20 UTC, with Colin and Andy. I've copied over some of their responses that I found give me better insight into Nano. Their responses are in italics. Responses to different questions are separated by double spaces. Colin's responses are listed first, followed by Andy's. Sorry I couldn't copy over the questions as well. I've added my comments in places.
From Colin:
PoW coins have done a good marketing that the energy expenditure makes your coins more secure but it’s really unnecessory. PoW coins need to continue expending work because if they stop, their security parameter erodes.
Nano has no such problem, once an election for a transaction is complete, it’s confirmed. If it sits there it stays confirmed and it doesn’t need any extra effort. Wow, put that way, Bitcoin seems unsustainable in the long term when there is an alternative like Nano.

Yes the circulating supply is forever like this. The reason it can’t change is because nano transactions can only send your current balance or less to someone else, this means new coins can never be injected in to the system. Interesting design reason new Nano can't be minted.

Volatility is a focus with all cryptocurrencies and it comes from low volume, it’s not intrinsic to cryptocurrency itself. To cure low volume our focus is integrating it in to parts of the economy where it solves a problem, rather than just emulating credit cards etc.
Not having fees in the network puts us in a very good position for buying beer, for example. Typically credit card providers will charge 2-5% for a purchase, maybe even more, and it tight margin businesses that make 2-5% profit anyway, this is huge. A lot of Reddit discussion on crypto adoption considers only user experience and overlooks benefits to merchants.

Nano is purpose built to be the fastest and most decentralized currency around. Our transactions settle in less than 1 second and it’s all done on a network with no fees, and a tiny environmental footprint
Decentralization is an essential focus for us, many other cryptocurrencies can get fast or low cost, but they can’t also maintain decentralization which I think we do very well.
Well the sustainability comes from 2 main parts. We have a laser sharp focus on being the most efficient currency. This means our development stays focused and eventually the amount of things going in to the code base will trend downward; once we’ve achieved the goal we just have to make things more efficient.
The second part of sustainability is our Open Representative Voting which is our replacement for PoW mining. We saw the energy expenditure as something that would come in conflict with any system that would attain high adoption so our goal was to get the same or better decentralization benefits and also have a low energy footprint. We think we achieved that goal as our representatives are all over the world under many different organizations. A healthy decentralized representative set is good for long term sustainability.

And on the simplicity, nano is probably one of the easiest cryptocurrencies to use. There are no fees to calculate, the UX impact of entering a fee is greatly understated. How much should the fee be? Does my grandma know what network load is? What does it mean with respect to fee?
Nano simply has accounts and balances, you send and it lands in their wallet in less than a second, nothing can be simpler.

We’re not looking to expand in to defi right now. I have some reservations about it’s viability. One thing I’ve noticed in my many years of seeing technology evolution is to not try and change 2 things at once. We don’t want to simultaneously change the currency people use and also change how finances are done. First change the currency, then change the finances.
I think Libra suffers from a market mis-assesment. Essentially what they’re claiming is be a multi-currency bank account for every facebook user. Getting users electronic bank accounts isn’t a technology problem, it’s a regulatory and logistics problem. Since Facebook is essentially being a bank for people, they’re going to be required to comply with KYC requirements. Sending/receiving isn’t going to be open as it is in cryptocurrency because of AML requirements. People are not going to have access to the system in remote areas because how do they deposit or more importantly withdraw local currency from their Libra accounts.
I think privacy is a big concern with our transactions and credit card purchases and it’s only getting worse. Letting Facebook/Libra know all your purchase history I think is a huge mistake.
I think it also doesn’t fundamentally solve the central banking problem where they can print more money and inflate the currency supply. I see this behavior as a fundamentally unethical thing that cryptocurrency solves and Libra is taking a huge step back on that.
I don’t see anything compelling about it and I don’t see long term viability.

I think disk usage is going to be a low concern long term. The goal with Nano is to be a widely used commercial grade currency so the representatives will be banks and other financial institutions, universities, and tech companies. Considering how much youtube, instagram, and other social media data is created each day, I don’t think the ledger size will be a long-term limiting factor. Looks like the role of hobbyists in running nodes will diminish with widening adoption.

Nano’s value is being the fastest, most efficient currency around. Entreprenuers make use of natural market incentives / natural efficiencies to make money on a business.
Cryptocurrency has distorted that term a bit with something more closely resembling subsidies. The transaction fees and block rewards are subsidizing the security parameter and processing prioritization. PoW chains need this subsidy because their security parameter costs a lot. Additionally we’ve seen miners work to limit the network’s throughput in order to rent-seek on the limited transaction space. Damn, talk about unaligned incentives between users and miners.
The people we’re looking for are the entreprenuers that know how to make use of a faster, lower cost currency.

Yes, having a fixed supply is an essential component of currency. If people can add more currency to the system, they’re taking value away from everyone else in that process. It’s unfair and unethical.
1 Nano actually can be divided down very small so there’s no risk of not having enough coins.

In this response, Colin is addressing a question about Steem and other dPoS systems. One major difference with Nano consensus is: having more Nano does not get you more Nano, there are no rewards for holding Nano. Holding nano doesn’t give people voting privledges on network changes, or any other centralizing component associated with holding.
Another big difference is voting in nano does not produce blocks, it chooses between conflicting blocks that a user publishes. If you don’t attempt to double-spend, your transactions cannot be voted against.

From Andy:
1. The faucet did indeed seed Nano's amazing international communities, and the contributions from around the world to the project have been unbelievable over that last 2.5 years. Communities are still active, engaged and building 💪
2. The effects of Nano being added to the Atomic Wallet (and other multi-currency wallets) is two fold. It increases the accessibility and convenience of storing Nano alongside other coins and also helps to disperse voting weight across a wider spread of representatives - increasing decentralization!

We certainly feel that Nano possesses far and away the best fundamentals, democratic approach to decentralization, and user experience.
Being fully distributed and operating on a the mainnet since 2015 is also very important, and puts Nano way ahead of many other projects making bold claims about future potential.
Nano is here today, and works as one would expect the digital money would!

Privacy is an attractive proposition to users of digital money for obvious reasons, it can be very important. Our position towards privacy is more conservative as we have seen many more hurdles to mainstream adoption being put in front of privacy-based projects.
With that being said, there are eyes towards the technical implications of introducing privacy, but it is extremely difficult to do this without incurring slowdowns to settlement times.
Throughout 2019 we were able to make significant progress in helping some of the more well-established cryptocurrency services such as exchanges, fiat gateways, payment platforms, and wallets- like Atomic 😄, to understand and integrate Nano. This proliferation of Nano across the space has ensured that it is increasingly more convenient for users and merchants to access and begin using Nano for payments.
submitted by Live_Magnetic_Air to nanocurrency [link] [comments]

Bull market is back… Another wave of hacker attacks starts again?

Bull market is back… Another wave of hacker attacks starts again?

The picture from COINDESK related reports
On Aug. 2, Ethereum Classic Labs (ETC Labs) made an important announcement on ETC blockchain. ETC Labs said due to network attack, Ethereum Classic suffered a reorganization on August 1st. This has been the second attack on the Ethereum Classic Network this year.
Did renting-power cause the problem again?
In this ETC incident, one of the miners mined a large number of blocks offline. When the miner went online, due to its high computing power, and some versions of mining software did not support large-scale blockchain mergers, the consensus failed. Therefore, the entire network was out of sync, which produced an effect similar to a 51% attack. Finally, it caused the reorganization of 3693 blocks, starting at 10904147. The deposit and withdrawal between the exchanges and mining pools had to be suspended for troubleshooting during this period.
Media report shows that the blockchain reorganization may be caused by a miner (or a mining pool) disconnected during mining. Although it has been restored to normal after 15 hours of repair, it does reflect the vulnerability of the Proof of Work (PoW) network: once the computing power of the network is insufficient, the performance of one single mining pool can affect the entire network, which is neither distributed nor secure for the blockchain. Neither does it have efficiency.
At present, most consensus algorithms of blockchains are using PoW, which has been adopted over 10 years. In PoW, each miner solves a hashing problem. The probability to solve the problem successfully is proportional to the ratio of the miner’s hash power to the total hash power of mainnet.
Although PoW has been running for a long time, the attack model against PoW is very straightforward to understand, and has attracted people’s attention for a long time: such an attack, also known as double-spending attack, may happen when an attacker possesses 51% of the overall network hash power. The attacker can roll back any blocks in the blockchain by creating a longer and more difficult chain and as a result, modify the transaction information.
Since hash power can be rented to launch attacks, some top 30 projects have suffered from such attacks. In addition to this interference, the main attack method is through the computing power market such as Nice Hash. Hackers can rent hashpower to facilitate their attacks, which allows the computing power to rise rapidly in a short time and rewrite information. In January of this year, the Ethereum Classic was attacked once, and it was also the case that hackers can migrate computing power from the fiercely competitive Bitcoin and Ethereum, and use it to attack smaller projects, such as ETH Classic.

The picture shows the cost of attacking ETH Classic. It can be seen that it costs only $6,634 to attack ETH Classic for one hour.
The security of one network is no longer limited by whether miners within the main net take more than 51% of the total hash power, rather it is determined by whether the benevolent (non-hackers) miners take more than 51% of the total hash power from the pool of projects that use similar consensus algorithm. For example, the hash power of Ethereum is 176 TH/s and that of Ethereum Classic is 9 TH/s. In this way, if one diverts some hash power from Ethereum (176 TH/s) to Ethereum Classic, then one can easily launch a double-spending attack to Ethereum Classic. The hash power ratio for this attack between the two projects is 9/176 = 5.2%, which is a tiny number.

https://preview.redd.it/qj57vgmgb9f51.png?width=699&format=png&auto=webp&s=39c1efc3645f268dbf1c73e1b373d532d5461006
As one of the top 30 blockchain projects, Ethereum Classic has been attacked several times. Therefore, those small and medium-sized projects with low hash power and up-and-coming future projects are facing great potential risks. This is the reason that many emerging public chain projects abandon PoW and adopt PoS.
Proof of Stake (PoS) can prevent 51% attack but has problems of its own
In addition to PoW consensus, another well-adopted consensus algorithm is Proof of Stake (PoS). The fundamental concept is that the one who holds more tokens has the right to create the blocks. This is similar to shareholders in the stock market. The token holders also have the opportunities to get rewards. The advantages of PoS are: (i) the algorithm avoids wasting energy like that in PoW calculation; and (ii) its design determines that the PoS will not be subjected to 51% hash power attack since the algorithm requires the miner to possess tokens in order to modify the ledger. In this way, 51% attack becomes costly and meaningless.

https://preview.redd.it/rf65o1vhb9f51.png?width=685&format=png&auto=webp&s=9d7a9f9dab6ce823a224e91afa9d116310cf27e1
In terms of disadvantages, nodes face the problem of accessibility. PoS requires a permission to enter the network and nodes cannot enter and exit freely and thus lacks openness. It can easily be forked. In the long run, the algorithm is short of decentralization, and leads to the Matthew effect of accumulated advantages whereby miners with more tokens will receive more rewards and perpetuate the cycle.
More importantly, the current PoS consensus has not been verified for long-term reliability. Whether it can be as stable as the PoW system is yet to be verified. For some of the PoW public chains that are already launched, if they want to switch consensus, they need to do hard fork, which divides communities and carries out a long consensus upgrade and through which Ethereum is undergoing. Is there a safer and better solution?
QuarkChain Provide THE Solution: High TPS Protection + PoSW Consensus
For new-born projects, and some small or medium-sized projects, they all are facing the problem of power attack. For PoW-based chains, there are always some chains with lower hash power than others (ETC vs. ETH, BCH vs BTC), and thus the risk of attack is increased. In addition, the interoperability among the chains, such as cross-chain operation, is also a problem. In response, QuarkChain has designed a series of mechanisms to solve this problem. This can be summed up as a two-layer structure with a calculation power allocation and Proof of Staked Work (PoSW) consensus.
First of all, there is a layer of sharding, which can be considered as some parallel chains. Each sharding chain handles the transactions relatively independently. Such design forms the basis to ensure the performance of the entire system. To avoid security issues caused by the dilution of the hash power, we also have a root chain. The blocks of the root chain do not contain transactions, but are responsible for verifying the transactions of each shard. Relying on the hash power distribution algorithm, the hash power of the root chain will always account for 51% of the net. Each shard, on the other hand, packages their transactions according to their own consensus and transaction models.
Moreover, QuarkChain relies on flexibility that allows each shard to have different consensus and transaction models. Someone who wants to launch a double-spending attack on a shard that is already contained in the root chain must attack the block on the root chain, which requires calling the 51% hash power of the root chain. That is, if there are vertical field projects that open new shards on QuarkChain, even with insufficient hash power, an attacker must first attack the root chain if he or she wants to attack a new shard. The root chain has maintained more than 51% of the network’s hash power, which makes the attack very difficult.

https://preview.redd.it/rxpohs7jb9f51.png?width=674&format=png&auto=webp&s=e2df1307a1753542472f2b6da88e7a4022b30884

As illustrated in the diagram, if the attacker wants to attack the QuarkChain network, one would need to attack the shard and the root chain simultaneously.
PoW has achieved a high level of decentralization and has been verified for its stability for a long time. Combining PoW with the staking capability for PoS would make use of the advantages of both consensus mechanisms. That is what QuarkChain’s PoSW achieves exactly.
PoSW, which is Proof of Staked Work, is exclusively developed by QuarkChain and runs on shards. PoSW allows miners to enjoy the benefits of lower mining difficulty by staking original tokens (currently it’s 20 times lower). Conversely, if someone malicious with a high hash power and does not stake tokens on QuarkChain, he will be punishable by receiving 20 times the difficulty of the hash power, which increases the cost of attack. If the attacker stakes tokens in order to reduce the cost of attack, he/she needs to stake the corresponding amount of tokens, which may cost even more. Thus, the whole network is more secure.
Taking Ethereum Classics (ETC) as an example, if ETC uses the PoSW consensus, if there was another double-spending attack similar to the one in January, the attacker will need at least 110Th/s hash power or 650320 ETC (worth $3.2 million, and 8 TH/s hash power) to create this attack, which is far greater than the cost of the current attack on the network (8Th/s hash power) and revenue (219500 ETC).
Relying on multiple sets of security mechanisms, QuarkChain ensures its own security, while providing security for new shards and small and medium-sized projects. Its high level of flexibility also allows the projects to support different types of ledger models, transaction models, virtual machines, and token economics. Such great degrees of security and flexibility will facilitate the blockchain ecosystem to accelerate growth of innovative blockchain applications.
Learn more about QuarkChain
Website https://www.quarkchain.io
Telegram https://t.me/quarkchainio
Twitter https://twitter.com/Quark_Chain
Medium https://medium.com/quarkchain-official
Reddit https://www.reddit.com/quarkchainio/
Community https://community.quarkchain.io/
submitted by QuarkChain to quarkchainio [link] [comments]

Crypto trade calculator Calculate A Sample Size of A proportion - YouTube How to Calculate your Crypto Trading Profits - Altrady for Better Cryptocurrency Profit 2020 Khan Academy - YouTube Bitcoin Trade Calculator App Tutorial

Block size is a compromise between scalability of transactions and verifiability of the system. A system with 10 transactions per day that is verifiable by a pocket calculator is not useful, as it would only serve a few large bank's settlements. A system which can deal with every coffee bought on the planet, but requires a Google-scale data center to verify is also not useful, as it would be ... Bitcoin Transaction Fees Explained in Detail. Bitcoin fees are a fascinating component of the network’s game theory and an indispensable element without which the whole project’s economic sustainability becomes questionable.. Whenever a transaction is sent, miners demand for an arbitrary amount of bitcoin fractions (denominated in satoshis, the hundred millionth part of 1 BTC) so that they ... The analysis below examines factors contributing to the increase in the average size of bitcoin transactions over the past couple of years. In particular, the average transaction size has increased from 450 bytes in Jan 2013 to almost 600 bytes in Oct 2015. Meanwhile, the prevalence of P2SH and other non-typical transaction outputs has also risen. To carry out the analysis, ~86… Currently, each block on the Bitcoin blockchain is able to contain 1mb of data, meaning that the block size of bitcoin is 1 megabyte. This means that there is a limit to how many transactions can fit in Bitcoin's blocks, according to the data contained in said transactions. But it wasn't always like this. The Bitcoin block reward refers to the new bitcoins distributed by the network to miners for each successfully solved block. How is the Block Reward Determined? Satoshi Nakamoto, Bitcoin’s creator, set the block reward schedule when he created Bitcoin. It is one of Bitcoin’s central rules and cannot be changed without agreement between the entire Bitcoin network. The block reward started ...

[index] [19868] [7460] [33997] [22165] [47175] [36868] [14624] [37094] [20497] [44986]

Crypto trade calculator

How to calculate a sample size for a proportion (percentage). Includes discussion on how sample changes as proportions (percentages) change. Calculating Samp... Monero developer Riccardo Spagni (@fluffyponyza) at the on-chain scaling event talking about the Bitcoin blocksize limit and solutions (Flexible blocksize) - Recorded at 2016-06-24 with Snagit. Block Operations 12,581 views. 30:58. What is Bitcoin Mining and is it worth doing? - Duration: 10:46. The Bitcoin Project 2,844 views. 10:46. What It Was Like MINING Cryptocurrency Full-Time For ... How to Calculate Bitcoin Transaction Size - Duration: 3 ... How to Calculate Stop Loss and Take Profit Easily // set profit target limit order - Duration: 8:56. David Moadel 93,827 views. 8:56 ... Crypto exchange rate calculator helps you convert prices online between two currencies in real-time. Online CryptoCurrency Calculator with multi-Cryptocurrencies. Cryptocurrency converter, calculator.

#